Gaggenau AI442720 Installation Guide
14
Connect the mains cable and control cable to the
control module.
control module.
3
For a combination with external remote fan unit
AR4.. only:
AR4.. only:
Use the network cable to connect the
external remote fan unit and the ventilation hood’s
control module. The plug must snap into place.
Connect the mains cable to the control unit.
control module. The plug must snap into place.
Connect the mains cable to the control unit.
Note: The X1 and X2 connection sockets are
identical.
identical.
4
Slide the ventilation hood up into the support frame
from below and hook it into the two angle brackets
from below and hook it into the two angle brackets
(a)
.
Note: Ensure that the mains cable is not trapped.
5
Align the ventilation hood so that it is straight and
use seven screws to fasten the ventilation hood to
the support frame.
use seven screws to fasten the ventilation hood to
the support frame.
D
D