Gaggenau AI442720 Installation Guide

9

Risk of electric shock
Parts inside the appliance can have sharp edges. 
The connection cable can be damaged. Do not 
bend or pinch connection cables during 
installation.

The required connection information is on the 
appliance's identification plate.

This appliance meets EC radio interference 
suppression requirements.

This appliance may only be connected to a correctly 
installed grounded socket.

Attach the grounded socket inside the flue duct if 
possible.

▯

The grounded socket should be connected via its 
own circuit.

▯

If the grounded socket is no longer accessible after 
installing the appliance, an all-pole isolating switch 
(e.g. circuit breaker, fuses, and contactors) with at 
least a 3 mm contact gap must be included in the 
installation.

▯

Measuring tape

▯

Pencil

▯

Torx screwdriver TX20

▯

Drill with the following bits: 5/16" (8 mm)

▯

Spanner, 7 mm

▯

Spirit-level

▯

Aluminum tape (DO NOT use insulating tape)

▯

Exhaust channel (configuration depends on the 
installation situation)

▯

Additional sheet metal screws (if necessary for 
installation of the exhaust air duct)