Monogram ZDP486NDPSS Manual
40
PROBLEM
POSSIBLE CAUSE
BURNERS DO NOT
• Electrical plug is not plugged into a live power outlet.
LIGHT OR SPARK
• Gas not turned on.
RANDOMLY
• Burner parts not replaced correctly.
• Holes in the simmer rings or slits in the burner rings are clogged.
• Clogged orifice, or wet burners or electrodes.
• Holes in the simmer rings or slits in the burner rings are clogged.
• Clogged orifice, or wet burners or electrodes.
BURNERS HAVE
• Burner parts not replaced correctly.
YELLOW OR
YELLOW-TIPPED
FLAMES
YELLOW-TIPPED
FLAMES
• If burner flames look like (A), call for service. Normal burner flames
should look like (B) or (C), depending on the type of gas.
BURNER FLAMES
• The range may be connected to the wrong fuel type. Contact the
VERY LARGE
person who installed your range or made the conversion.
OR YELLOW
BURNER CONTROL
• When the knob is at the OFF position, it must be pushed in before
KNOB WILL NOT
it can be turned, and it can only be turned in a counterclockwise
TURN
direction. When the knob is at any other position, it can be turned
in either direction without being pushed inwards.
in either direction without being pushed inwards.
A. Yellow flames: Call for
service.
B. Yellow tips on outer cones:
Normal for LP gas.
C. Soft blue flames:
Normal for natural gas.
The Problem Solver
Professional Dual Fuel Range