Broan RMP17004 Installation Instruction

- 3 -

1.

To reduce risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent
exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages.

2.

Take care when using cleaning agents or detergents.

3.

Avoid using food products that produce flames under the Range Hood.

4.

For general ventilating use only. Do not use to exhaust hazardous or explosive mate-
rials and vapors.

5.

To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall
spray, construction dust, etc. off power unit.

6.

Your hood motor has a thermal overload which will automatically shut off the motor if it
becomes overheated. The motor will restart when it cools down. If the motor continues
to shut off and restart, have the hood serviced.

7.

For best capture of cooking impurities, the bottom of the hood should be a minimum of
24" and a maximum of 30" above the cooking surface.

8.

Two installers are recommended because of the large size and weight of this hood.

9.

This product is equipped with a thermostat which may start blower automatically. To
reduce the risk of injury and to prevent power from being switched on accidentally,
switch power off at service panel and lock or tag service panel.

10. Use with approved cord-connection kit only.
11. Please read specification label on product for further information and requirements.
12. To reduce the risk of fire and electric shock, install this range hood only with Broan

Exterior blower models 331H, 332H, 335 or 336, or Broan In-Line Blower models HLB3,
HLB6, HLB9 or HLB11. Other Blowers cannot be substituted (Blowers sold separately).