Broan RMP17004 Installation Instruction
- 4 -
PREPARE THE HOOD
Unpack hood and check contents.
You should receive:
You should receive:
1 - Hood
1 - Parts Bag (B080810168) containing:
1 - Parts Bag (B080810168) containing:
4 - Mounting Screws (3,2 x 13mm)
1 - Installation Instructions
4 MOUNTING
SCREWS
SCREWS
(3,2 x 13mm)
EXTERIOR OR IN-LINE BLOWER SELECTION
CAUTION: Either an exterior blower or in-line blower may be used with this hood.
The RMPE hood must be installed with blower models 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 or HLB11 only. Other Blowers cannot be substituted (Blowers sold
separately).
The blower must be UL listed for Canadian and U.S. use, and evaluated for use with
solid state speed control, rated 120V, 60 Hz, 6.0 A max.
The RMPE hood must be installed with blower models 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 or HLB11 only. Other Blowers cannot be substituted (Blowers sold
separately).
The blower must be UL listed for Canadian and U.S. use, and evaluated for use with
solid state speed control, rated 120V, 60 Hz, 6.0 A max.