Broan RMP17004 Installation Instruction

- 7 -

Do not turn power on at service panel until
all wires have been connected.
Blower connection at hood:
1. Run conductors (2-wire plus ground) from

the exterior or In-Line blower to the hood’s
wiring box marked “motor connection”.

2. Remove the cover from the wiring box and

remove one knockout.

3. Secure the conduit to the wiring box

through a conduit connector.

4. Make electrical connections at the hood.

Connect white-to-white, red-to-black and
green-to-ground.

5. Replace the wiring box cover and screws.

make sure wires are not pinched between
the cover and box.

Exterior or In-Line blower connection:
1. Make electrical connections at the exterior

or In-Line blower (see instructions provided
with the exterior or In-Line blower).

Power connection at hood:
1. Run supply conductors to the hood wiring

box marked “120VAC input”.

2. Remove the cover from the wiring box and

remove one knockout.

3. Secure the conduit to the wiring box

through a conduit connector.

4. Make electrical connections at the hood.

Connect white-to-white, black-to-black
and green-to-ground.

5. Replace the wiring box cover and screws.

Make sure wires are not pinched between
the cover and box.