TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

 

 

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a 

DHCP/BOOTP server on your network, this option allows the print server 
to obtain IP-related settings automatically from your DHCP server. 

IP Address: This option allows you to view IP address from the print server. The IP address 

must meet the IP addressing requirements of the network segment. (default: 
192.168.0.10) 

Subnet Mask: This option allows you to view subnet mask from the print server. 

Gateway’s IP: This option allows you to view gateway from the print server. 

Rendezvous Settings: The Rendezvous settings of print server Enable or Disable. 

 
 
Netware Status:

1. Click Status, it then appears the sub-menu. 

2. Click Netware it then as shown in the following picture. 

                                                                                            33