TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

Status 

Blinking for POST 
(Yellow) 

When power switched on, the Status indicator will flash five 
times, and then on. 

100Mbps  On (Green) 

LAN Port has a valid network connection at 100Mbps. 

10Mbps  On (Yellow) 

LAN Port has a valid network connection at 10Mbps. 

 

Before you start, you should prepare the following items: 
 

„  One Windows-based computer with print server setup CD 
„  One printer with a Parallel port 
„  One printer cable 

 
 

 

To install the print servers, you need to complete these steps: 
․Confirm that your printer parallel port works well. 
․Connect the print server to the network and printer, and plug in the print server. 
 
Follow these instructions to install the print servers, please refer to any peripheral 
you are connecting to the print server: 
 
1.  Turn off the printer’s power. 

 

2.  Connect the print server to your printer with printer cable. 
 

3.  Turn the printer’s power on. 

 

4.  Plug the AC power adapter into the power connector on the print server. 

 

5.  Wait 10 seconds until all the LEDs have stopped flashing. 
 
Note: The Status LED should be flash five times when POST. If not, please contact your 
local dealer for repair or replacement. 
 

                                                                                           

5