TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

 

8.Upgrading Print Server 

Upgrading print server will allow you to upgrade its firmware inside the print server while the 
newer software version of the print server is available from your local dealer. Depending on 
the different systems users might use, this chapter is divided into several Sections; please 
refer to the following lists for your systems. 
 

  

Note: 1.Before you proceed to upgrade the print server, please ensure that the necessary 

binary file is located on your current working directory. 

2.Before upgrading the print server, ensure that it is not printing jobs. You have to wait 

until the print job is finished before you can proceed. 

3.Be careful not to interrupt the file transfer. If the transfer is interrupted, the print 

server may have to be re-initialized by your dealer. 

 

1.  Log into your NetWare file server as a Supervisor  (Admin.) or equivalent. 
 
2.  Ensure binary file is located in the PSAdmin directory. 
 
3. Run 

PSAdmin from your Windows PC. 

 
4. Click 

the 

Upgrade icon on tool bar. 

 
 
Upgrading the print server from Windows NT/2000/XP/2003 (Through 
TCP/IP) 

 

1.  Ensure binary file is located in your current working directory. 
 
2.  At NT/2000/XP/2003’s DOS prompt, and type “tftp –i <print server’s IP address> put 

mpsXX.bin “. 

 

                                                                                            63