D-Link DWL-P50 Power over Ethernet (PoE) Adapter DWL-P50 Leaflet

With the DWL-P50, both power and data can be 
transmitted to an Ethernet device that is deployed 
up to 328 feet (100m)

1

 away. Using standard Ethernet 

cabling connected to a PoE midspan switch, the 
DWL-P50 is capable of receiving data and power 
with virtually no reduction in data throughput.

The DWL-P50 supports the 802.3af PoE industry 
standard ensuring compatibility with other 802.3af 
compliant injector units and midspan switches. In 
addition, this terminal unit is a plug & play making 
installation of a complete end-to-end PoE solution 
very straightforward.

The DWL-P50 is designed to work with your existing 
D-Link networking products, such as cameras and 
wireless access points. Depending on the network 
device the DWL-P50 is connecting to, you can adjust 
the output power

2

 to 5V or 12V via the voltage selector 

located on the pack of the terminal unit.

The DWL-P50 simplifies your remote network device 
installation by allowing you to place the device 
in locations that are beyond the reach of standard 
electrical outlets. You can now mount a remote 
Internet camera or wireless access point on a wall 
or on the ceiling without running separate wiring 
for power.

1

 Maximun distance per 802.3u specifications

2

 Maximum power output: 5 volts= 2.5 amps; 12 volts = 1 amp