Bosch HCB50651UC Manual

9

▯

Press and hold the "Light" button for 5 seconds.

▯

An audible signal sounds and "Snd" appears on the 

display panel for 3 seconds.

▯

Press and hold the "Light" button for 5 seconds.

▯

"Snd" appears on the display panel for 3 seconds.

The appliance is equipped with overheating protection. If 

high temperatures are measured on the appliance, the 

appliance switches automatically to the highest ventilator 

setting until the temperature drops again.

▯

If the hood is switched on, the highest ventilator setting 

is set. If the temperature drops again, the appliance 

switches back to the previously-selected ventilator 

setting.

▯

If the hood is switched off, the appliance switches 

automatically to the highest ventilator setting. If the 

temperature drops again, the appliance switches off 

automatically.

▯

While the overheating protection is active, "Auto" 

appears on the display panel. The ventilator setting 

cannot be reduced in this time.

9

WARNING
To avoid risk of fire and explosion do not use 

flammable liquids or solvents. Always unplug or 

disconnect the appliance from the power supply 

before servicing. 

Do not use steam cleaners to clean the appliance.
Hidden surfaces may have sharp edges. Use caution 

when reaching behind or under appliance.

9

RISK OF BURNS
The appliance will become hot when in use, 

especially in the area surrounding the bulbs. Let 

cool before cleaning.

9

RISK OF ELECTRIC SHOCK
Penetrating damp can cause electric shock. Only 

clean appliance with a damp cloth. Prior to cleaning, 

pull the plug or flip the breaker in the fusebox.

To prevent various surfaces from becoming damaged 

due to incorrect cleaning agents, follow the specifications 

given in the table. Do not use

▯

cleaning agents that are harsh or scouring,

▯

cleaning agents with high alcohol content,

▯

hard scouring pads or sponges,

▯

high-pressure cleaners or steam cleaners.

Thoroughly rinse all new sponges before use.

Observe all instructions and warnings accompanying 

cleaning agents.

Stainless steel

Warm soapy water: 

Clean with a dish rag and dry with 

a soft towel.
Only clean stainless steel with the 

grain.
Specific products for stainless 

steel care are available from cus-

tomer service or from specialized 

retailers. Apply a thin layer of the 

care product with a soft cloth.

Varnished

surfaces

Warm soapy water: 

Clean with a damp dish rag and 

dry with a soft towel.
Do not use stainless steel 

cleaner.

Aluminum and 

plastic

Glass cleaner: 

Clean with a soft cloth.

Glass

Glass cleaner: 

Clean with a soft cloth. Do not use 

a glass scraper.

Controls

Warm soapy water: 

Clean with a damp dish rag and 

dry with a soft towel.
Risk of damage to electronics 

due to permeating damp. Never 

clean controls with a wet cloth.
Do not use stainless steel 

cleaner.