Bosch NITP066SUC Manual

13

As a conventional burner
By default, the flexible cooking zone can be used as a 

single burner.
Activate this function
The cooktop must be turned on.

Select the flexible cooking zone with the symbols 

Á

 

or 

Â

. 

‹

.

‹

 lights up in the element display.

Set the desired power level with the number keys.

The flexible cooking zone is activated.
Changing the heat setting
Change the heat setting on the control panel.
Add another piece of cookware
Select the flexible cooking zone and touch the

Flex ON symbol. The element will detect the new piece of 

cookware.
The previously set power level will be maintained.
Note:  When you lift or remove cookware from an 

activated element the element will automatically try to 

detect the cookware. The previously set power level is 

maintained.
Turning off this function
Select the cooking zone and touch the Flex OFF symbol. 

As two burners
The flexible cooking zone can be used as two 

independent burners.
Activating this function

Select the flexible cooking zone and touch the Flex 

OFF symbol. The indicator 

b

 lights up between the 

Á

 

and 

Â

 symbols.

Select one of the flexible cooking zones. 

‹

.

‹

 lights up 

in the element display.

Set the power level with the number keys.

The function is switched off by:
selecting the burner and pressing the 0 symbol. The 

burner switches off.
Note:  If the cooktop is switched off and on again, the 

flexible cooking zone is switched to operation as a single 

burner again.

The SpeedBoost function can be used to heat large 

amounts of water faster than by using heat level 

Š

.

Limitation on use
This function is available on all elements, provided that 

no other element in the same group is operating, (see 

picture). If this is not the case, the 

›

 and 

Š

 symbols will 

flash on the selected element display; then it will 

automatically set the power level 

Š

.

Note:  You can achieve maximum power on the flexible 

cooking zone by placing just one piece of cookware in 

the middle of the cooking zone as described in the 

Flexible Cooking Zone chapter.

Select an element.

Touch Speed Boost. The function is set.

Select an element on which SpeedBoost is set.

Touch Speed Boost. The function is deactivated.

Note:  In certain circumstances, the function may be 

deactivated automatically to protect the internal 

electronic components of the cooktop.

You can use the timer function to set a cook time for any 

element. The element will turn off automatically once the 

set time has elapsed. 

9

▯

When using the timer, always keep an eye on the 

cooktop and do not allow anything to boil over or 

burn. Boilovers can cause smoke and foods and 

oils may catch on fire if left on high temperature 

settings.

▯

This function should not be used for long periods 

of time, especially at high heat settings. 

▯

Make sure the cooktop is turned off with the main 

power switch after each use.









*URXS

*URXS