Asko T884XLW Owner's Manual

12

Customer Care Center, 1-800-898-1879, www.askona.com

TROUBLESHOOTING

NOTE!
When starting the tumble dryer for the first time or 

after a long period without use, you may notice a slight 

thumping noise. This noise is completely normal and 

will disappear after a few loads. 

THE MACHINE WILL NOT START 

Check:
•  that the door is properly closed.
•  that the main power switch is on.
•  that the Delayed Start option has not been selected. To 

cancel Delayed Start, press the Stop button for three 

seconds.

•  that the plug is connected.
•  that the main fuses have not blown.
•  that the overheating cut-out has not been triggered.

If the lint filter not is cleaned regularly, the machine’s 

automatic overheating cut-out may be triggered 

because of to high temperature. The heaters in the 

machine will then switch off and the drum will continue 

to spin to cool down the machine.
Call the service division if:
•  Heating fault appears on the display.
•  Max program time is shown frequently in the display 

and the laundry does not get dry. (Overheating pro-

tection may have been tripped.)

THE MACHINE LOSES ALL POWER 

DURING A PROGRAM

The overheating cut-out shuts off the tumble dryer if the 

temperature is too high, e.g. because dust is clogging the 

lint filter.
•  Clean the lint filter.
•  Wait until the machine has cooled then try starting it. If 

it still does not start: Call the service division.

DRYING TAKES TOO LONG

•  Check that the lint filter is not clogged (see the Care 

and cleaning chapter).

ERROR MESSAGES

•  Read Drying takes too long in this chapter if Max pro-

gram time appears on the display. 

•  If Clean Lint Filter appears on the display, clean the lint 

filter.

•  Call the service division if Thermistor fault appears on 

the display. 

•  Press the Stop button to close any error messages.