Amana NED5800DW Quick Setup Guide

Reinstall hinge and latch on

opposite sides

Using a TORX

T25

screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides from

which they were removed.

Remove hinge and latch

Using a TORX

T25

screwdriver, remove the 3 TORX

screws

securing the latch plate and latch backing plate and the 5

screws holding the hinge assembly in place.

Hinge

Latch

Rotate and reassemble outer window

assembly to trim ring

With the edge with 2 notches at the top, align the notches on

the outer window assembly with the tabs on the trim ring and

lower into place as shown in figure A.

Rotate the outer window assembly counterclockwise to lock

tabs into place (figure B). Using a Phillips screwdriver, secure

with 2 screws removed earlier.

IMPORTANT: Do not overtighten.

Fig. A

Fig. B

Bottom

of door

Notches