Fire Magic 194B2N0 Installation Instruction

Page of 18
REV 2 -  1103150807
L-C2-333
3
TABLE OF CONTENTS
PRODUCT DATA TABLE
Table 1 - Product Data Table
Note:  The hanger requires 2" 
(5.1 cm) of counter top 
on each side and back to 
support the unit.
Specifi cation
Value
Counter opening height*
12" (30.5 cm)
Counter opening width*
19" (48.3 cm)
Counter opening depth*
18 3/4" (47.6 cm)
BTU
60,000 (17.6 kw)
Natural gas orifi ce left
#30 (3.261mm)
Natural gas orifi ce right
#46 (2.055 mm)
Propane gas orifi ce left
#50 (1.778 mm)
Propane gas orifi ce right
#1.25
*Note: If using an insulating liner 
(par t number 3278-50) 
consult liner instructions for 
counter cut-out dimensions.
ELECTRICAL SAFETY
To protect against electric shock, do not immerse cord or plugs (if equipped) in water or other liquid;
Unplug from the outlet (if applicable) when not in use and before cleaning. Allow to cool before putting on or 
taking off parts;
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance malfunctions 
or has been damaged in any manner. Contact the manufacturer for repair;
Do not let the cord hang over the edge of a table or touch hot surfaces;
Do not use an outdoor cooking gas appliance for purposes other than intended;
When connecting, fi rst connect plug to the outdoor cooking gas appliance then plug appliance into the outlet;
Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance;
Never remove the grounding plug or use with an adapter of 2 prongs.
Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for 
outdoor use with a W-A marking.
3 PRODUCT 
DATA 
TABLE
4 PARTS 
LIST
PLANNING FOR INSTALLATION OF YOUR POWER BURNER
WHERE TO INSTALL THE POWER BURNER
GAS PLUMBING REQUIREMENTS FOR YOUR SLIDE-IN POWER BURNER
ENSURING PROPER COMBUSTION AIR AND COOLING AIR FLOW
GAS SUPPLY PLUMBING REQUIREMENTS
GAS SUPPLY AND MANIFOLD PRESSURES
GAS SUPPLY PRESSURE TESTING
SAFE USE & MAINTENANCE OF PROPANE GAS CYLINDERS
INSTALLING YOUR FIRE MAGIC POWER BURNER
CHECK FUEL ORIFICES FOR PROPER SIZE
POSITION THE BURNER FOR OPERATION
CONNECT THE GAS SUPPLY
POWER SUPPLY FOR IGNITION AND LIGHTED KNOBS
10 
POWER SUPPLY (MULTIPLE ACCESSORY UNITS)
11 
INSTALL THE FLAME COLLIMATOR
11 
REMOVE THE CONTROL PANEL TO CHECK RATING PLATE
11 
ADJUST THE AIR SHUTTERS
13 
LIGHTING (IGNITION) INSTRUCTIONS
13 
SHUTTING OFF THE UNIT
14 
CARE & CLEANING
15 
CHECKING AND CONVERTING GAS TYPE 
15 
CHECKING AND CONVERTING THE REGULATOR 
16 
POWER BURNER NOTES PAGE
17 TROUBLESHOOTING
18 WARRANTY