Bosch HBE5451UC Owner's Manual

Page of 68
10
Before using the oven for the first time
In this section, you can find out what you must do before 
using your oven to prepare food for the first time. Read 
the Safety information section beforehand.
Remove the appliance packaging and dispose of it 
appropriately.
Setting the time
After connecting the oven or after a power failure, 
:
‹‹
 
and auto will blink on the display.
1.
Hold the TIMERS button down until the colon blinks on 
the display.
2.
Set the current time with the 
@
 and 
A
 buttons. Hold the 
@
 or 
A
 button down to change the value faster.
The time set is taken over after 5 seconds.
Setting the time during operation
1.
Hold the 
@
 and 
A
 button down until the colon blinks 
on the display.
2.
Set the current time with the 
@
 and 
A
 buttons. Hold the 
@
 or 
A
 button down to change the value faster.
The time set is taken over after 5 seconds.
Baking out the oven
Pre-cleaning the oven
1.
Remove the accessories, the hook-in racks and the 
roof liner from the cooking compartment.
2.
Completely remove any leftover packaging, e.g. small 
pieces of polystyrene, from the cooking compartment.
3.
Some parts are covered with a protective film. Remove 
this scratch protection film.
4.
Clean the outside of the appliance with a soft, damp 
cloth.
5.
Clean the cooking compartment with hot soapy water.
Heating up the oven
To remove the new smell, heat up the oven when it is 
empty and closed.
1.
Turn the function selector to the Bake operating mode.
2.
Turn the temperature selector to the maximum 
temperature.
3.
Switch the oven off after 40 minutes.
Re-cleaning the oven
1.
Clean the cooking compartment with hot soapy water. 
2.
Refit the hook-in racks.
Cleaning the accessories
Before using the accessories, clean them thoroughly 
using a cloth and warm soapy water.
Operation
Switching on the oven
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature.
The oven begins to heat up.
Switching off the oven
Turn the function selector and temperature selector to 
the off position.
Changing settings
The heating function and temperature or broil setting can 
be changed at any time using their respective selectors.
Heating up
In order to heat up the cooking compartment as quickly 
as possible, use the "Conv Bake" heating type. When the 
set temperature has been reached (indicator light lights 
up continuously and signal sounds), set the desired 
heating type.
Kitchen timer
The short-term timer has no influence on the functioning 
of the oven. The duration of the short-term timer can be 
set from 1 minute to 23 hours and 59 minutes.
1.
Hold the TIMERS button down until the 
 blinks and 
:
‹‹
 is displayed.
2.
Set the desired duration with the 
@
 and 
A
 buttons. 
The set time is taken over after 5 seconds.
After the time has elapsed, a signal sounds and the 
 
symbol blinks.
Note:  While the short-term timer is running, the time is 
displayed and the 
 symbol lights up continuously.
Changing the set time: 
To change the remaining time, hold the TIMERS button 
down until the 
 symbol blinks on the display. Then 
change the remaining time with the 
@
 and 
A
 buttons. 
Canceling the short-term timer 
To delete the setting, hold the TIMERS button down until 
the 
 symbol blinks on the display.Then press the 
@
 and 
A
 buttons simultaneously.