Bosch B36BT830NS Use & Care Manual

When Sabbath Mode is switched On, the following 

settings are switched Off:

■

Ice Maker

■

Acoustic Signal

■

Interior Light

■

Messages in the Display Panel

■

The background illumination of the Display Panel is 

reduced

■

Buttons are locked.

Switching On
1. Press and hold down the COOL SUPER Button.
2. Press the VACATION Button.
3. Press the COOL SUPER Button and hold down for 

a further 3 seconds.
The “VACATION” symbol flashes on the Display 

Panel and “SABBATH” is displayed.

Press the VACATION Button.
The previous settings and temperature values are once 

again activated.

If the Energy Saving Function (Eco Function) is 

activated, the appliance switches to the Energy Saving 

Operation. This Energy Saving Function is preset 

at the factory in order to reduce energy consumption. 

The background illumination of the Display Panel is 

likewise reduced.
Switching On
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “ECO MODE” 

and the current setting (OFF) is displayed.

3. Press the Setting Button @, in order to reset 

the setting.

4. Press the SETUP Button, in order to store the setting.

“ECO” is displayed on the Display Panel.

Switching Off
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “ECO MODE” 

and the current setting (ON) is displayed.

3. Press the Setting Button A, in order to reset 

the setting.

4. Press the SETUP Button, in order to store the setting.

To prevent condensation, the door rail heater can be 

switched On and Off as required.
Switching On
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “DRY DOOR“ 

and the current setting (OFF) is displayed.

3. Press the Setting Button @, in order to reset 

the setting.

4. Press the SETUP Button, in order to store the setting.
Switching Off
1. Press the SETUP Button.
2. Press the Selection Button ¿, until “DRY DOOR“ 

and the current setting (ON) is displayed.

3. Press the Setting Button A, in order to reset 

the setting.

4. Press the SETUP Button, in order to store the setting.

The Door Alarm switches On if an appliance door is left 

open for longer than three minutes. Close the door 

to switch Off the Warning Signal.

The Temperature Alarm switches On if the Freezer 

Compartment is too warm and the frozen food is at risk 

of thawing.
The set temperature of the Freezer Compartment 

flashes and “ALARM” is displayed on the display panel.
When the ALARM button is pressed, the temperature 

display for the Freezer Compartment indicates for five 

seconds the warmest temperature reached 

in the Freezer Compartment.
Then this value is deleted. The temperature display for 

the Freezer Compartment indicates the set Freezer 

Compartment temperature without flashing.
Henceforth the “warmest temperature” will be redefined 

and saved.
The alarm display goes out as soon as the set 

temperature has been reached again.
The alarm may switch on without any risk 

■

when the appliance is switched On,

■

when large quantities of fresh food are placed 

in the appliance,

■

if the Freezer Compartment Door is open too long.

Press the ALARM button to switch Off the Warning 

Signal.