GE PVW7361EJES Specification Sheet

Page of 2
Listed by 
Underwriters 
Laboratories
Specification Revised 4/15
For answers to your Monogram,
® 
GE Profile
 
or GE
®
 appliance questions, visit our website 
at geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
24" Min
36" Max
18-1/2"
10-3/16"
11-3/4"
36"
*Height
to
Ceiling
1-3/4"
PVW7361SJ_EJ
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height. The telescopic
duct cover conceals the ductwork running from the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately. 
 
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
 
24" Min
36" Max
18-1/2"
10-3/16"
11-3/4"
36"
*Height
to
Ceiling
1-3/4"
PVW7361SJ_EJ
The vent hood must be installed 24" min. and 36" max. above the cooking surface.
The hood installation height above the cooking surface depends upon ceiling height. The telescopic
duct cover conceals the ductwork running from the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately. 
 
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
 
InstallatIon InformatIon:  
Before installing, consult Use & Care/installation instructions 
packed with product for  current dimensional data.
optIonal accessorIes 
JXDC71SS/ES-10(ft.) Ceiling Duct Cover Kit  
Max ceiling height installation with kit - 10'-0"
JXRC70-Remote Control
JXCF71-Charcoal Filter  
(needed if used in recirculation mode)
Amp Rating
120V
5.3
pVW7361sJ/eJ 
GE Profile
™ 
Series 36" Wall-Mount Glass Canopy Chimney Hood
DImensIons anD InstallatIon InformatIon (In Inches) 
36" Models Require a 36"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling 
heights (10" with optional high ceiling kit JXDC71)
The vent hood must be installed 24" min. and 36" max. above the cooking surface. 
The hood installation height above the cooking surface depends upon ceiling height. 
The telescopic duct cover conceals the ductwork running from the top of the hood to 
the ceiling.
NOTE: Installation height should be measured from the cooking surface to the 
lowest part of the hood. This hood may be installed onto a wall and vented to the 
outdoors, or it can be installed for recirculating operation. Parts for recirculating 
operation are supplied with the hood. However, when installed for recirculating 
operation, the optional charcoal filter JXCF71 will need to be purchased separately.