Viking VBCI5150GLSS Installation Instruction
11
General Information
Unpacking and Moving Unit
Do not cut cardboard sleeve covering the
unit. Cutting may result in damage to the
exterior of the cabinet.
unit. Cutting may result in damage to the
exterior of the cabinet.
CAUTION
1. Uncrate the unit outside on a flat level
surface. Remove the cardboard sleeve by
removing the banding holding the sleeve
to the shipping base. Carefully lift the
cardboard sleeve up over the top of the
unit.
removing the banding holding the sleeve
to the shipping base. Carefully lift the
cardboard sleeve up over the top of the
unit.
2. Carefully lift unit off base and onto a hand
truck or dolly (this should be done with a
minimum of two people; larger units may
require additional help). Make sure unit is
balanced on transporting device. Secure
unit to transporting device using soft,
flexible strapping. Protect unit surfaces
with cloth material where strapping
contacts unit.
minimum of two people; larger units may
require additional help). Make sure unit is
balanced on transporting device. Secure
unit to transporting device using soft,
flexible strapping. Protect unit surfaces
with cloth material where strapping
contacts unit.
3. Before moving unit, secure door to unit
with tape so the door stays closed.
4. Carefully move unit to installation site and
place in front of opening. Take care to
protect floor surface with cardboard, rugs,
etc.
protect floor surface with cardboard, rugs,
etc.
A minimum of two people should lift the
unit at the base to prevent possible
personal injury.
unit at the base to prevent possible
personal injury.
WARNING