Viking VBCI5150GLSS Use & Care Manual
9
Interior Light
Interior Light
The unit is equipped with an interior light that is illuminated when the door is opened. The cabinet also comes standard
with a display light function located on the control panel for displaying your products through a glass door. To use
display lighting, press the Light button. The light icon on the display will go from flashing to continuous. Do not use
the display light function with a solid door product. If the display light is left on for an extended period of time, it may
increase the cabinet temperature, especially at the top and cause the refrigeration system to run longer. To turn off
display lighting, open door and press the Light button. The light icon on the display will go from continuous to
flashing.
with a display light function located on the control panel for displaying your products through a glass door. To use
display lighting, press the Light button. The light icon on the display will go from flashing to continuous. Do not use
the display light function with a solid door product. If the display light is left on for an extended period of time, it may
increase the cabinet temperature, especially at the top and cause the refrigeration system to run longer. To turn off
display lighting, open door and press the Light button. The light icon on the display will go from continuous to
flashing.
Light Bulb Replacement
NOTE: Please contact your Viking Range parts distributor or dealer to order the LED light bulb.
To replace light bulb, unscrew the bulb counterclockwise and replace with new bulb.
Checking Product Temperature
To accurately check the temperature of the product stored in a refrigerated compartment, insert an accurate
thermometer into a plastic (non-breakable) bottle, partially filled with water. Tighten the bottle cap securely.
thermometer into a plastic (non-breakable) bottle, partially filled with water. Tighten the bottle cap securely.
Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24
hours, check the temperature of the water. Adjust the control settings if necessary and re-test.
hours, check the temperature of the water. Adjust the control settings if necessary and re-test.
Your units are pre-set in order to achieve the recommended temperature range when installed in a 70°F ambient room
temperature. Factors, which affect the internal temperatures of the refrigerated cabinet, include:
temperature. Factors, which affect the internal temperatures of the refrigerated cabinet, include:
• Temperature setting
• Room temperature where installed
• Number of times the door is opened and closed
• Length of times the door is opened and closed
• Length of times the door is left open
• Style of door installed
• Door gasket sealing and condition
• Amount of time the internal light is illuminated
• Installation in direct sun light or near a heat source
• Room temperature where installed
• Number of times the door is opened and closed
• Length of times the door is opened and closed
• Length of times the door is left open
• Style of door installed
• Door gasket sealing and condition
• Amount of time the internal light is illuminated
• Installation in direct sun light or near a heat source