Amana AE093G35AX Manual

5

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

Tools Needed

Through-the-wall installation:

In addition to the tools listed above, the following tools are 
needed for though-the-wall installation.

Parts supplied (on some models)

Check that all parts are included in parts package.

NOTE: Installation parts are supplied for double-hung windows 
up to 40" (101.6 cm) wide. A special Wide Window Kit is available 
from your dealer or service center. See “Accessories.”

IMPORTANT:  Observe all governing codes and ordinances.

Check the location where air conditioner will be installed. Proper 
installation is your responsibility. Make sure you have everything 
necessary for correct installation.

The location should provide:

■

Grounded electrical outlet within 4 ft (122 cm) of where the 
power cord exits the air conditioner. 

NOTE: Do not use an extension cord.

■

Free movement of air in room to be cooled.

■

A large enough opening for the air conditioner.

■

Adequate wall support for weight of air conditioner. Air 
conditioner weighs  between 94 and 103 lbs (43 to 47 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able 
to pass freely through the cabinet louvers.

WARNING:

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

  

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

■

Flat-blade and Phillips 
screwdrivers

■

Level

■

Tape measure

■

Drill and 

³⁄₁₆" or smaller bit

■

Saw

■

Wood preservative

■

Caulk

■

1" (2.5 cm) or thicker 
lumber

■

7 - #10 x 

1" wood screws

A. Foam window  sash seal  

B. Window lock brackets (2)

C. #10  x 

¹⁄₄" pan-head Phillips 

screws (6)

D. #10  x 

³⁄₈" pan-head 

Phillips screws (3)

E. #10 x 

³⁄₄" round-head screws (6) 

F. #10  x 

1

/

2

" pan-head Phillips 

screws (3)

G. Top  channel 
H. Side curtains (2)

I. Foam  seal

B

C 

G

F

  E

A

H

I

A. Cabinet louvers

A

D