Amana AE093G35AX Manual

8

Remove packaging materials.

„

Remove and dispose of/recycle all packaging materials.  Remove
tape and glue residue from surfaces before turning on the air
conditions. Rub a small amount of liquid dish soap over the adhesive
with your fingers. Wipe with warm water and dry.

„

Do not use sharp instruments, rubbing alcohol, flammable fluids or
abrasive cleaners to remove tape or glue.  These products can
damage the surface of your air conditioner.

„

Handle air conditioner gently.

1.

Remove air conditioner from carton and place it on cardboard.

2.

Remove shipping screws from both sides of cabinet.

A. Shipping screw

A

3.

Remove front panel by removing 2 Phillips screws on bottom left and right
side of front.

4.

Remove shipping screws (2).

5.

Pull on handle to slide air condition out of cabinet.  Place air conditioner on
cardboard.

6.

Remove any packing foam from inside of unit.

A. Handle

A

NOTE: Do not lift, push, pull or remove any expanded polystyrene (foam)

from inside the air conditioner.  It is NOT packing material.

NOTES:

„

Handle air conditioner gently.

„

Be sure your air conditioner cabinet does not fall out of the opening
during installation or removal.

„

The location where the power cord exits the air conditioner should
be no more than 4 ft. (122 cm) from a grounded 3-prong outlet.

„

Do not block the louvers on the front panel.

„

Do not block the louvers on the outside of the air conditioner.

_________________________________________________________

Attach Top Channel

___________________________________________________________

NOTE: Attach top channel and side curtains to air conditioner cabinet

before placing cabinet in window.

1.

Locate supplied bag of screws.

2.

Place top channel on top of air conditioner cabinet, lining up the 3
holes in top channel with the 3 holes on top of the air conditioner
cabinet.

3.

Using three (3) #10 x 3/8" pan-head Phillips screws, attach top
channel to air conditioner cabinet.

A

B

B

B