Fire Magic VH6 Installation Instruction

REV 2 - 1406051400

L-C2-387

23

Important:  Wear gloves during this procedure for safety 

and to maintain bulb life.

1.  Ensure the power cord has been disconnected.

2.  With one hand directly below the light assembly, gently 

pry the glass lens out using a thin fl at-head screwdriver. 
Slowly twist the screwdriver handle until the lens is 
removed.

Note:  Replacement should only be done on a light 

assembly that is completely cool.

3.  Clean the lens with a standard household window 

cleaner, dry completely, and set aside.

4.  Gently remove the bulb from its socket.

5.  Install a new 120V  / 50 watt halogen bulb into the 

socket, being sure that both pins are properly inserted.

Important:  Bulb is halogen. DO NOT TOUCH with bare 

hands. Oils from hands drastically reduce 
bulb life.

6.  Place the lens back into the fi xture and snap it into place.

Note:  The curved cutout of the lens should align over the 

bulb when replacing the lens.

7.  Repeat as needed.

8.  Reconnect the power cord and test.

Fig. 23-2 Replace bulb

Fig. 23-1 Light orientation