Summit CL63FDOS Owner's Manual

Page of 32
Operation 
Operating conditions 
Proper operation of the appliance is 
guaranteed only if the following conditions   
are met: 
  The temperature in the room where the 
appliance is located conforms to the 
climate class stated on 
the appliance’s 
rating label. 
  Maximum ambient relative humidity: 
RH75%. 
  The appliance must be placed at a 
sufficient distance from heat sources ( e.g., 
ovens, central heating, direct sunlight, 
etc.). 
  The appliance must be located in such a 
place that it is protected against the 
effects of weather. 
  Regular maintenance is performed 
according to the instructions in this user’s 
manual. 
  The ventilation openings in the cover of 
the appliance must not be covered by 
anything. 
  Correct installation ( e.g., leveling, the 
capacity of the system corresponds to the 
specifications on the rating label of the 
appliance). 
 
 
 
Control elements 
For Models : CL65ROS/CL63FDOS 
 
1) 
“ 
 
” button   
  To turn the unit ON and OFF, press and hold   
    this button for approximately 3 seconds.   
2) “
” button   
Energy conservation button: Pressing this 
button for 3 seconds will turn the energy 
conservation mode on or off. In this mode, the 
LED light and display will turn off, and the 
C/
F light will be on.   
3) “
 
  “   
indicator light   
Shows that the compressor is in operation.   
4
) “°C/°F” 
indicator light 
The temperature scale is changed by   
        pressing the 
C/
button.
   
5) “ 
  ”
 button
 
Used to increase (warm) the temperature in 
steps of 1
F (or 1
C). 
6) “
” button
 
Used to decrease (cool) the temperature in 
steps of 1
F (or 1
C). 
7) 
“°C/°F”
 button
 
Press this button to switch the indicator light 
between 
C and 
F. 
8) 
LED display 
Shows the temperature of the internal cabinet
Setting the temperature 
  Insert the power plug into a properly grounded 
power socket. 
  Use the 
/
    buttons to set the desired 
temperature of the appliance. Each time the 
/
buttons are pressed, the temperature 
will increase / decrease by 1
F (or 1
C).   
 
CL65ROS
 
       
You can set the temperature in the range of 
36° F to 50° F (or 2° C to 10° C). 
 
CL63FDOS
 
You can set the temperature in the range of     
39° F to 64° F (or 4° C to 18° C). 
 
9
 
1
2
3
4
5
6
7
8