Bosch HMV3052U Installation Instruction

10

Use the mounting plate as a template and place it on 

the wall, making sure that the tabs are touching the 

bottom of the cabinet or the level line.

Line up the notch and centerline of the mounting plate 

to the centerline on the wall.

While holding the mounting plate, draw circles on the 

wall at holes A, B, C and D.
Note:  If neither A, B, C nor D is in a stud, find a stud 

somewhere in the bottom area of the mounting plate 

and draw a fifth circle to line up with the stud.
It is important to use at least one wood screw mounted 

firmly in a stud to support the weight of the microwave.

Set the mounting plate aside.

Drill holes on the circles:

▯

3/16” (5 mm) holes for wood screws (stud)

▯

5/8” (16 mm) holes for toggle bolts (no stud)

Insert the bolts into the mounting plate through the 

holes designated.

Attach toggle wings from the back of the mounting 

plate onto each bolt. Leave enough space for toggle 

wings to go through the wall and to open.

Place the mounting plate against the wall and make 

sure tabs are touching the bottom of the cabinet or the 

level line (see "Aligning the mounting plate").

Push the bolts through the drywall and finger tighten 

the bolts to make sure toggle wings have opened 

against drywall.

$

%

'

&

$

%

'

&