Bosch HMV3052U Installation Instruction

9

Note:  The microwave must be connected to at least one 

wall stud. If no wall studs exist within the cabinet 

opening, do not install the microwave oven.

Locate the edges of the wall studs within the cabinet 

opening by using:
- a stud finder or
- a hammer (tapping lightly across the mounting 

surface to find a solid sound).

Place a mark halfway between the edges and draw a 

line down the center of the studs (See possible wall 

studs configuration).

These depictions show examples of preferred installation 

configurations with the mounting plate.
Note:  Care must be taken when drilling holes. Electrical 

wires may be concealed behind the wall covering and 

contact with them could result in electrical shock.

If wall stud is within 6¼" (159 mm) of the vertical 

centerline, only Room Venting (recirculation) or Roof 

Venting installations can be done.

9

Wear gloves to avoid cutting fingers on sharp 

edges.

Note:  Make sure the cabinet bottom is level.

Draw a vertical line on the wall at the center of the 

cabinet space.