Bosch HMV5052U Manual

12

The clock can be set in 12-hour mode.

Touch Clock once.

Enter the time using the number keys.  

Example: To set the clock to 12:41 type in 1 2 4 1.

Touch Clock to confirm.

The time of day is displayed.

You can set a timer value of up ot 99 minutes and 

99 seconds.

Touch Kitchen Timer.
The 

Â

 symbol lights up and 

‹‹

:

‹‹

 is blinking.

Enter the desired time using the number keys.

Touch Kitchen Timer to confirm.

The Kitchen Timer starts counting down. 
Once the set time has elapsed 4 beeps will sound. To 

stop the beep, touch Kitchen Timer.
To cancel the kitchen timer, touch Kitchen Timer again 

or open the appliance door.

The Vent feature moves steam and other cooking vapors 

from the cooking surface of the range below the 

microwave oven. 
You can set four different vent speeds.
Set the vent feature by touching Vent (high/low). The 

ventilation symbol 

¾

 will light up on the display.

Note:  If the temperature gets too hot around the 

microwave oven, the fan of the vent feature will 

automatically turn on at the lowest setting to cool the 

oven. The fan will automatically turn off when the internal 

parts are cool. When this occurs, the vent cannot be 

manually turned off.

The appliance is equipped with a cooking surface light, 

to light the surface underneath the appliance.
With the Light key you can set two brightness levels.

For best cooking results, leave the turntable on. It can be 

turned off for large dishes.
To turn the turntable off, touch Turntable (on/off) once. 

The 

Á

 symbol and 

‹””

 lights up briefly. Touch the 

key again to turn the turntable on. The 

Á

 symbol and 

‹Ÿ

 lights up briefly.

9

▯

Sometimes the turntable can become hot. Be 

careful touching the turntable during and after 

cooking.

▯

Do not run the oven empty.

▯

Do not operate the oven without the turntable in 

place.

The appliance must be turned off.

Enter the desired cooking duration with the number 

keys. The timer display will fill in from right to left. 

Example: To set a microwave cooking time of 

20 minutes and 30 seconds, enter the numbers 

2 0 3 0. START is blinking.

You can start microwave operation with the default 

power level 10 by touching Start/Enter, 

or - 

you can adjust the power level. Touch Power Level. 

The default power level 

˜–‚‹

 is blinking. The 

segments in the bar underneath the number display 

also indicate the power level.

Enter the desired power level using the number keys. 

˜–

and the selected power level and START are 

blinking in the display.

Touch Start/Enter to start microwave operation.
The microwave timer will start to count down.

The microwave timer can be changed during operation 

by touching +30 Seconds.
The power level can be changed during operation. To 

display the set power level, touch Power Level.
Once the microwave time has run out, four beeps will 

sound. The appliance turns off and the clock is 

displayed.

once

•‚

twice

3 times

4 times

–‹

5 times

OFF

High

once

Low

twice

Off

three times