Bosch HCP30E51UC Installation Instruction

14

RISK OF ELECTRIC SHOCK
Before wiring the appliance, interrupt the main 

electrical circuit at the electrical control cabinet. A 

circuit with 120 VAC, 15 or 20 Ampere is required.
Grounding notes: this appliance is equipped with a 

distributor box with 3 cables. Use the green-yellow 

cable for grounding the appliance. Connect the 

green-yellow cable to the grounding cable on the 

house connection to prevent electric sthock. Do not 

under any circumstances damage or remove the 

green-yellow cable. Non-adherence can cause 

deadly injuries or electric shock.

Remove the left cable passage and the cover of the 

motor controller. Fasten the connecting piece for the 

installation pipe (listed in cULUS) to the cable 

passage.

Connect 1/2" (12.7 mm) installation pipe to motor 

controller.

Hidden surfaces may have sharp edges. Use caution 

when reaching behind or under appliance.

Remove the protective foil from both flue ducts.

Push one flue duct into the other.
Notes

To prevent scratches, lay paper over the edges of 

the lower flue duct to protect the surface.
For ducted operation, turn the upper flue duct so 

that the ventilation slots point downward.

Remove the protective foil from the extractor hood.

Place flue ducts on the appliance.

Push the inner flue duct upwards and attach it to the 

angle brackets on the left and right.

A

Cable passage

B

Cover of the motor controller

A

Installation pipe

B

Power connection

C

Cable connector listed in UL