Miele DA6690WSS Installation Instruction

Cleaning and care

29

 If the filters have been installed incor‐

rectly, you can insert a small screw‐

driver into the slit to disengage the

locking clip.

Resetting the filter saturation indica‐

tor for the grease filter
Once cleaning is complete, the filter

saturation indicator must be reset.
 While the fan is turned on, press the

grease filter button  for approx. 3

seconds, until only the 1 is flashing.

The grease filter symbol  goes out.
When cleaning the grease filters before

the full operating time has elapsed:
 Press the grease filter button  for

approx. 6 seconds, until only the 1 is

flashing.

OdorFree Charcoal Filter

If the hood is equipped for recirculation,

an OdorFree Charcoal Filter must be in‐

stalled in addition to the grease filters.

This filter is designed to absorb odor-

causing agents and is mounted in the

canopy above the grease filters.
OdorFree Charcoal Filters are available

from your Miele dealer or from Miele.

See "Technical data" for the type and

reference number.

Installing/replacing the OdorFree

Charcoal Filter
 To install or replace the OdorFree

Charcoal Filter, the grease filters must

first be removed as described above.

 Remove the OdorFree Charcoal Filter

from its packaging.

 Press the OdorFree Charcoal Filter in‐

to the frame.

 Reinstall the grease filters.
 When installing the filter for the first

time, activate the filter saturation

counter (see "Operation").