Miele DA5106DSS Installation Instruction

Cleaning and care

28

 Replace the grease filter, making sure

that the locking clip is facing down

towards the cooktop.

 If the filters have been installed

incorrectly, you can insert a small

screwdriver into the slit to disengage

the locking clip.

Resetting the filter saturation

counter for the grease filters
Once cleaning is complete, the filter

saturation counter must be reset.
 While the fan is turned on, press the

filter saturation indicator  for

approx. 3 seconds until 1 is the only

indicator flashing.

The grease filter symbol  goes out.
When cleaning the grease filters before

the full operating time has elapsed:
 Press the filter saturation indicator



 for approx. 6 seconds until 1 is

the only indicator flashing.

OdorFree Charcoal Filter

If the hood is connected for

recirculation, an OdorFree Charcoal

Filter must be inserted in addition to the

grease filter. This is designed to absorb

cooking odors. 

It is fitted in the canopy above the

grease filter.
OdorFree Charcoal Filters are available

from your Miele dealer or from Miele

Service. See "Technical data" for the

type and reference number.

Installing/replacing the OdorFree

Charcoal Filter
 To install or replace the OdorFree

Charcoal Filter, the grease filters must

first be removed as described above.

 Remove the filter from its packaging.

 Press the filter into the frame.
 Replace the grease filter.
 When installing the filter for the first

time, activate the filter saturation

counter (see "Operation").