Bosch HBLP751UC Installation Instruction

English 10

4. Guide the unit straight back into the cabinet cutout.  

Note: Be careful not to crimp the flexible conduit 
between the oven and the cabinet back wall. If 
necessary, guide the flexible conduit into the wall or 
cabinet access hole so it doesn’t prevent the unit from 
being pushed all the way into the cabinet opening. The 
oven should be straight and level, not crooked.

5. Install the oven bottom trim while the door is removed 

and the unit is in place. (Do not push the unit all the 
way in, leave about 1 inch extending from the front of 
the cabinet). Use two of the screws provided in the red 
bag included with the trim piece. 

3. Push the unit straight in until the oven trim is flush with 

the front of the cabinet trim.

4. Install supplied screws through tap holes in trim. (2 

screws for single ovens, 4 screws for double/combo 
ovens).

1. Align holes in trim ends with holes at bottom of oven.
2. Insert screws and tighten firmly. Do not overtighten.

1. Hold the door firmly in 

both hands.

2. Hold the door at a 30º 

angle from the closed 
position and insert 
hinges into the slots.
You may need to rock 
the door forward and 
backward slightly to 
seat the hinge feet.

3. The door may need to 

be removed and re-
inserted until the 
hinges sit correctly in 
the slots.

4. Open door all the way 

to expose hinges, 
levers, and slots.

5. Push levers forward 

and down until seated 
on the bracket.

6. Close and open door 

slowly to be sure it is 
correctly and securely 
in place. Door must be 
straight, not crooked.