DCS CPV486G Installation Instruction

3

The cooktops are tested in accordance with ANSI Z21.1 Standard for Household Cooking Gas Appliances.  
These cooktops must be installed in conjunction with a suitable overhead vent hood.  (See ventilation 
requirements).  Due to the professional high heat capacity of this unit, particular attention should be paid to 
the hood and duct work installation to ensure it meets local building codes.  To eliminate risk of burns or fire by 
reaching over heated surface units, cabinet storage located above the surface units should be avoided.

Check local building codes for the proper method of cooktop installation.  Local codes vary.  Installation, 
electrical connections, and grounding must comply with all applicable codes.  In the absence of local codes, the 
cooktop should be installed in accordance with the National Fuel Gas Code ANSI Z223.1 and National Electrical 
Code ANSI / NFPA 70.  Be sure that the unit being installed is set up for the kind of gas being used.  The gas 
cooktop is shipped from the factory set and adjusted for natural gas or LP (propane), depending on the specific 
model ordered.  Verify that the cooktop is compatible with gas supply at the installation site before 
proceeding further.  Return cooktop to dealer if unit is not set for site gas supply.