Summit SCM1800M2 User Manual
Note : When the program has been saved, you can press START to start cooking or you can also
press STOP/RESET to cancel.
press STOP/RESET to cancel.
You can set a two or three stage cooking program by repeating steps 4 and 5 once or twice.
Suppose you want to set a multi-stage cooking program to number pad 3.
First stage : 5 minutes of DEF microwave power cooking ;
Second stage : 3 minutes of HI microwave power cooking ;
Third stage : 1 minute of MED microwave power cooking.
Steps :
1. Open the door, place food in the oven and close the door.
2. Touch PROG once.
3. Press number key 3.
3. Press number key 3.
4. Press
POWER LEVEL
three times and press number pad to enter the cooking time.
5. Press
POWER LEVEL
once and press number pad to enter the cooking time.
6. Press
POWER LEVEL
twice and press number pad to enter the cooking time.
7. Press PROG to save.
Note:
If you want the oven to start immediately after touching any of the number keys instead of after you
touch the START key, press and hold down STOP/RESET for 5 sec until “P L” appears on the
display; now you don’t have to press the START key after selecting a cooking program by touching
any of the number keys.
touch the START key, press and hold down STOP/RESET for 5 sec until “P L” appears on the
display; now you don’t have to press the START key after selecting a cooking program by touching
any of the number keys.
If you want to cancel the auto-number start setting, you can press and hold down STOP/RESET
for 5 sec until “P PROG” appears on the display.
for 5 sec until “P PROG” appears on the display.
HOW
TO
USE
THE
X2
PAD
More cooking programs can be stored under the number keys by using the X2 function.
In waiting mode, by pressing X2, any of the number keys, and the START key, you can recall a
preset cooking program as follows:
preset cooking program as follows:
Number/Memory
Keys
Keys
1
2
3
4
5
6
7
8
9
0
Preset Cooking
Time
Time
:20
:40
1:00
1:30
2:00
3:00
4:00
5:00
6:00
7:00
The X2 function can only program one stage cooking. After setting is finished, press STOP/RESET
to return to waiting mode. The oven will start after you touch X2, any of the number keys and then
the START key.
to return to waiting mode. The oven will start after you touch X2, any of the number keys and then
the START key.
For example, to use the X2 function, and save a program of full power and 3 minutes cooking to
number pad 8.
number pad 8.
1. Open the door and place food in the oven, close it.
2. Touch PROG once.
3. Touch X2 pad once.
4. Press number pad 8.
15