Summit SEH1524 Instruction Manual

E

F

wood wall

3.Fix the suspender screws.
   Fix the screws to holes A and B.Keep a clearance of 5 
mm (0.2") between wall and head of screws in order to 
hang  the  hood  body  easily.Fix  the  chimney  mounting 
plate to holes E and F by using the screws provided with 
hood.

4. Hang the range hood on the wall:

Hang the range hood on screws A and B, then tighten the screws securely. Fix two 
screws into the C and D holes through the corresponding holes inside the hood. 
Assemble flexible aluminum tubing to the plastic fitting on the hood.  Connect the 
other  end  of  the  tubing  to  the  wall  outlet.   Assemble  upper  exhaust  to  lower 
exhaust.  Place both parts on the range hood.  Screw lower exhaust to the body 
using the side holes.  Fix upper exhaust by using the holes on the side of exhaust 
mounting plate fixed to holes E and F.

D

C

10

13

Be sure the bulb is cool before trying to change it.

1

2

Disconnect the hood. 

Remove the aluminum cassette filter. 

In order to change the 50-watt halogen light bulb, refer to diagram below.  (1) Press 
down on the back part of the lamp holder and (2) turn it counter-clockwise.  

Replace old bulb with new one.  Turn in reverse direction when installing new bulb.

50-W Halogen bulb

Note:  Replacement bulbs can be purchased directly from SUMMIT by calling us at 
1-800-932-4267 or by going to our website at www.summitappliance.com/support.  
Have the model number of your range hood handy.

If you expect to have to move your range hood:
*

Keep original packaging.  Move your hood using original packaging; comply 
with moving instructions printed on the packaging.

If you do not have original packaging:
*

Do not put any load on the range hood.

*

Avoid any possible impacts.

*

Pack the hood in such a way as to prevent damage.