Asko T884XLHPW Owner's Manual

Page of 24
8
Customer Care Center, 1-800-898-1879, www.askona.com
TUMBLE DRYING
SELECTING OPTIONS
By selecting options, you can tailor a drying program to 
suit your requirements. The available options depend 
on the selected program. Once you have started the 
program, the options you selected are saved for the 
next time you use the same program. The exception is 
Delayed Start, which is not saved for the next time.
 Temperature Low
You can select Temperature Low with all programs except 
Air Fluff .
•  Select Temperature Low by pressing the button under 
the symbol.
•  The symbol lights when Temperature Low is selected.
 Buzzer Volume
You can choose to have the machine notify you when a 
program has finished or if an error has occurred.
•  Select Buzzer Volume by pressing the button under the 
symbol.
•  The symbol lights when Buzzer Volume is selected.
 Time saver
You can select Time saver with all programs except Air 
Fluff. The program is shortened by about 12 minutes.
•  Press the button under the symbol.
•  The symbol lights when Time Saver is selected.
 Anti Wrinkle
This option means that the drum will rotate for three 
seconds every minute for two hours after the drying 
program has finished. If you are unable to remove the 
items immediately after the program has finished, this 
option prevents the garments from remaining in the same 
position and becoming wrinkled. Cannot be selected 
with the Air Fluff program. If the Buzzer Volume option 
has also been activated, an audible signal will sound 
each time the drum rotates as a reminder that the drying 
program has finished.
•  Select Anti Wrinkle by pressing the button under the 
symbol.
•  The symbol lights when Anti Wrinkle is selected.
 Delayed Start
First select which program you want to use and then 
select Delayed Start by pressing the + button. The display 
shows Delayed Start in whole hours. Press the + / - button 
to select a delayed start of 1 to 24 hours. The symbol for 
Delayed Start lights next to the number of hours. Press 
the Start button and the machine will count down 1 hour 
at a time and start after the selected delay. This option 
cannot be used with Timed Dry or Air Fluff .
PRESS THE START BUTTON
Remaining drying time
An estimate of the remaining drying time will be shown on 
the display a few minutes after the drying program starts. 
1:35 means that it will take approximately 1 hour and 35 
minutes for the load to dry. If the Anti Wrinkle option has 
been selected, the drum will rotate for three seconds 
every minute for two hours after the program is finished.
The actual remaining time may be longer than the 
estimated time shown on the display. The remaining time 
is then shown as 0:15 until the laundry is sufficiently dry. 
If you selected Time saver, the display will show 0:05 
instead.
You can stop the tumble dryer by pressing the Stop 
button or by opening the door. In both cases the program 
is stopped and starts from the beginning if restarted.
NOTE!
The program will not be affected if you change the 
program selector after the program has started.
DRYING PROGRAMME FINISHED
The text End appears on the display when the program is 
finished. If the Anti Wrinkle option has been selected, the 
drum will rotate for three seconds every minute for two 
hours after the program is finished.
Backlighting 
Two minutes after the drying program finishes the 
backlighting on the display and option buttons enters 
energy saving mode.
NOTE!
Clean the lint filter in the outer door after each load. 
See the Care and maintenance instructions chapter.
WARNING!
If the lint filter becomes clogged, the machine’s 
automatic overheating cut-out may be triggered. Clean 
the filter, wait until the machine has cooled, then try 
starting it. If it still does not start: Call the Customer 
Care Center.
Once drying has finished
Turn off the main power switch. Remove the clothes and 
close the door to prevent small children from climbing into 
the machine.