Bosch HDIP054U Manual

English 7

Burner Caps

The cooktop has three different burner sizes; small, 
medium, and large. Match the corresponding letters on the 
burner cap and burner base.

The burner cap is porcelainized steel. The burner caps 
must be properly placed for the cooktop to function 
properly. If the burner cap is not properly placed, one or 
more of the following problems may occur:

•

Burner flames are too high.

•

Flames shoot out of burners.

•

Burners do not ignite.

•

Burner flames light unevenly.

•

Burner emits gas odor.

Each cap has a letter (A, D, or F) cast in the underside of 
the cap that corresponds to a letter (A, D, or F) cast in the 
burner base that is attached to the appliance. 

•

Place each burner cap on its correct burner base per 
its corresponding letter designation. See figure 
“Burners Caps” on page 8.

Place burner cap gently on top of base so that the prongs 

of the burner base fit snugly into the groove of the burner 

cap.

•

Check to make sure there is not gap between the 
burner cap and burner base. See figure “Burner Cap 

Placement” on page 8 to see the correct and incorrect 
placements of the burner cap.

•

You may gently try to move the burner cap from side to 
side to check if it is properly placed. If properly placed,

9 WARNING

To prevent flare-ups and avoid creation of harmful 
by-products, do not use the cooktop without all 
burner caps and all burner grates properly 
positioned.

Burner Grate

Burner Cap

Burner
Cooktop

Ignitor

9 WARNING

To prevent burns, do not touch burner caps or 
grates while hot. Turn the cooktop off and allow the 
burners to cool..

Matching letter 

designation.