Bosch NIT8066SUC Installation Instruction

3

9

READ AND SAVE THESE INSTRUCTIONS

R

E

A

D

 

A

N

D

 

S

A

V

E

 

T

H

E

S

E

 

I

N

S

T

R

U

C

T

I

O

N

S

IMPORTANT: THE APPLIANCE HAS TO BE INSTALLED 

BY A QUALIFIED INSTALLER.  
INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE 

APPLIANCE AFTER INSTALLATION IS COMPLETE.  
IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE 

LOCAL ELECTRICAL INSPECTOR'S USE.

If the information in this manual is not followed exactly, 

fire or shock may result causing property damage or 

personal injury.

Do not repair, replace or remove any part of the 

appliance unless specifically recommended in the 

manuals. Improper installation, service or maintenance 

can cause injury or property damage. Refer to this 

manual for guidance. All other servicing should be done 

by a qualified technician.

Remove all tape and packaging before using the 

appliance. Destroy the packaging after unpacking the 

appliance. Never allow children to play with packaging 

material. 
Hidden surfaces may have sharp edges. Use caution 

when reaching behind or under appliance.
Improper installation can mean to lose the warranty.

This appliance complies with one or more of the 

following Standards:

▯

▯

▯

▯

It is the responsibility of the owner and the installer to 

determine if additional requirements and/or standards 

apply to specific installations.

Before you plug in an electrical cord or turn on power 

supply, make sure all controls are in the OFF position.

If required by the National Electrical Code (or Canadian 

Electrical Code), this appliance must be installed on a 

separate branch circuit.
The circuit breaker should have a contact separation of 

at least 3 mm on all poles.

RISK OF ELECTRICAL SHOCK OR FIRE
Frame grounded to neutral through a ground strap. 

Grounding through the neutral conductor is prohibited for 

new branch-circuit installations (1996 NEC), mobile 

homes, and recreational vehicles, or in an area where 

local codes prohibit grounding through the neutral 

conductor.
For installations where grounding through the neutral 

conductor is prohibited,

disconnect the link from the neutral,

use grounding terminal or lead to ground unit,

connect neutral terminal to lead branch circuit neutral 

in usual manner (when the appliance is to be 

connected by means of a cord kit, use  a UL listed 4-

conductor cord for this purpose). 

Be sure your appliance is properly installed and 

grounded by a qualified technician. Installation, electrical 

connections and grounding must comply with all 

applicable codes.
Before installing, turn power OFF at the service panel. 

Lock service panel to prevent power from being turned 

ON accidentally.
Installer – show the owner the location of the circuit 

breaker or fuse. Mark it for easy reference.

The appliance is only guaranteed safe to use if installed 

by a specialist in accordance with these installation 

instructions. The installer is liable for any damage 

resulting from incorrect installation.
Never modify or alter the construction of the appliance. 

For example, do not remove leveling legs, panels, wire 

covers or anti-tip brackets/screws. 
To eliminate the risk of burns or fire by reaching over 

heated surface units, cabinet storage space located 

above the surface units should be avoided. If cabinet 

storage is to be provided, the risk can be reduced by 

installing a hood that projects horizontally a minimum of 

5 inches (127 mm) beyond the bottom of the cabinet.
Verify that cabinets above the cooktop are a maximum of 

13" (330 mm) deep. 
Under the stovetop, no refrigerators, dishwashers, ovens 

without ventilation or washing machines must be 

installed.
Note:  We strongly recommend the installation of a 

ventilation system with this appliance.