Bosch HDI8054U Manual
English 32
Cleaning the Oven
Self Clean
During self-clean, the oven is heated to a very high
temperature. Soil is burned off at this temperature.
temperature. Soil is burned off at this temperature.
NOTICE:
Wipe out excessive spillage before self-cleaning the oven.
NOTICE:
Do not clean parts or accessories in the Self-Clean oven.
Remove all baking dishes and oven racks from the oven
prior to running Self-Clean.
Remove all baking dishes and oven racks from the oven
prior to running Self-Clean.
To set the self-clean mode:
1. Remove all accessories and racks from the oven.
2. If there is a cooking mode on, press Oven Clear/Off to
2. If there is a cooking mode on, press Oven Clear/Off to
end the running mode.
3. Press the Self Clean touchpad below the display.
The self clean icon
q
appears in the display. The self
clean timer default (4:00) hours blinks to indicate it can
be accepted or changed.
To accept the 4:00 hour default self clean time, press
Enter on the numeric keypad.
To enter a different number of hours use the numeric
keypad. The value entered must be within the range of
2:00 to 4:00 hours. Entering a value less than 2:00 or
greater than 4:00 results in an error tone and message.
Use a longer setting for a heavily soiled oven.
be accepted or changed.
To accept the 4:00 hour default self clean time, press
Enter on the numeric keypad.
To enter a different number of hours use the numeric
keypad. The value entered must be within the range of
2:00 to 4:00 hours. Entering a value less than 2:00 or
greater than 4:00 results in an error tone and message.
Use a longer setting for a heavily soiled oven.
4. When the desired self clean time is displayed press
Enter on the numeric keypad.
The oven door locks prior to starting Self Clean.
The oven door locks prior to starting Self Clean.
The door lock symbol
L
is displayed and blinks while
the door is being locked. Once locked, the door lock
symbol is continuously illuminated (not blinking).
symbol is continuously illuminated (not blinking).
The door lock symbol remains illuminated as long as
the self clean mode is running.
Note: The door remains locked until the oven has
cooled down after self cleaning. The door can be
opened again only after “Self Clean” disappears from
the display.
the self clean mode is running.
Note: The door remains locked until the oven has
cooled down after self cleaning. The door can be
opened again only after “Self Clean” disappears from
the display.
5. Self Clean starts and the oven self clean timer begins
its countdown.
To Cancel Self Clean
Press the Oven Clear/Off touchpad to cancel Self-
Clean.
When the self clean timer ends, for safety the unit must
cool down before the door can unlock. During this
period the message “COOLING DOWN” is displayed.
To Cancel Self Clean
Press the Oven Clear/Off touchpad to cancel Self-
Clean.
When the self clean timer ends, for safety the unit must
cool down before the door can unlock. During this
period the message “COOLING DOWN” is displayed.
6. When the cool down is complete, the message “SELF
CLEAN FINISHED” is displayed. Continue to use
caution when opening the oven door.
caution when opening the oven door.
9 WARNING
Children should not be left alone or unattended in an
area where appliances are in use. During the self
clean cycle, parts of the appliance may become
potentially harmful to persons who lack adult
knowledge of appliances and adult reactions to
potentially harmful conditions.
During the elimination of soil during self-cleaning,
small amounts of carbon monoxide can be created.
Fiberglass insulation could give off very small
amounts of formaldehyde during the first several
cleansing cycles. To minimize exposure to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.
area where appliances are in use. During the self
clean cycle, parts of the appliance may become
potentially harmful to persons who lack adult
knowledge of appliances and adult reactions to
potentially harmful conditions.
During the elimination of soil during self-cleaning,
small amounts of carbon monoxide can be created.
Fiberglass insulation could give off very small
amounts of formaldehyde during the first several
cleansing cycles. To minimize exposure to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.