Bosch HMC87151UC Installation Instruction

10

▯

Connect red wire from oven to red wire in junction box.

▯

Connect black wire from oven to black wire in junction 

box..

▯

Connect both green ground wire and white wire from 

oven to white, green or bare neutral wire in junction 

box.

The conduit cable, where connected at the oven, swivels. 

Rotate conduit cable upward (or downward) and direct 

through hole prepared in cabinet to attach to junction 

box.
To maintain serviceability, the flex conduit must not be 

shortened and should be routed to permit temporary 

removal of the oven.

Note:  The appliance is heavy. It is advisable to insert it 

together with a second person.
NOTICE:  Before installing the oven, be sure to verify the 

cabinet dimensions and electrical connections.

Fully insert the appliance and centre it. Do not kink the 

electrical cable.

Screw the appliance into place.

Turn on power at the breaker.

For Model HMC80251UC: Check power at junction 

box using a volt meter.
For 240 V installation, the reading between the red 

and black wires (line to line) should be 220 to 240 

volts.
For 208 V installation, the reading between the red 

and black wires (line to line) should be 190 to 208 

volts.

Test the oven mode:
Select the CONVECTION mode. See the Use and Care 

Manual for detailed operation instructions.

Verify that the oven light comes on and the oven 

begins to preheat.

Test the microwave:
Place a cup of water into the oven cavity. Follow The 

instructions in the Use and Care Manual on how to 

heat a beverage.

Verify that the oven light comes on and the water is 

heated.

If any of the tests do not result as explained above, 

contact service for assistance. Otherwise, the 

installation is complete at this time.

SRZHUVXSSO\

MXQFWLRQER[

UHGZLUHV

ZKLWHEDUHRU

ZKLWHZLUH

JUHHQZLUH

JUHHQZLUH

FDEOHIURP

8/OLVWHG

EODFNZLUHV

RYHQ

FRQQHFWRU