Bosch HMC87151UC Manual

19

Touch Start/Enter.
The appliance starts preheating. The set temperature, 

the preheat bar and the oven mode FROZEN FOODS 

are displayed. The time of day will be permanently 

displayed.

The set temperature is reached once the preheat bar has 

filled up completely and a beep sounds. Place food in 

the preheated oven on the metal tray in a single layer.
To change the temperature during operation, touch 

Frozen Food. Type in the new temperature using the 

number keys and confirm with Start/Enter.
Opening appliance door during operation
Opening the appliance door during operation will 

interrupt the current mode. When you close the 

appliance door, operation will be resumed.
Cancel operation
Touch Clear/Off to cancel the active oven mode. The 

appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then 

switch off automatically.

You can use the Pizza mode to bake three different types 

of pizza:

▯

For fresh pizza use a pizza paddle for sliding the pizza 

on and from the metal turntable.

▯

If using a pizza paddle, sprinkle the paddle liberally 

with cornmeal for ease in transferring the dough to the 

metal turntable.

▯

Maximum size is 12 inches for fresh and frozen pizzas.

▯

Avoid using a pizza stone as it can damage the oven.

▯

The metal turntable can be used for cutting pizza into 

slices. Remove the turntable from the oven after the 

pizza is baked.

Setting Pizza mode for fresh or frozen pizza
The appliance must be turned off.
You can set a temperature range from 375 to 450° F 

(190 to 230°C) for fresh and frozen pizza modes.

You can bake fresh or frozen pizza directly on the metal 

tray turntable.

Touch Pizza.
The display shows SELECT TYPE 

‚

 - 

„

. 

Touch Pizza or +Amount repeatedly to scroll through 

all pizza modes. 

Touch Start/Enter. For frozen or fresh pizza the 

display reads BAKE ON METAL TRAY. The default 

temperature and 

;

 light up on the display.

You can change the temperature by using the number 

keys. Touch Start/Enter to confirm.
The appliance starts preheating.

The set temperature is reached once the preheat bar has 

filled up completely and a beep sounds.
Opening appliance door during operation
Opening the appliance door during operation will 

interrupt the current mode. When you close the 

appliance door, operation will be resumed.

Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it 

in the oven following package directions.

Touch Pizza.
The display shows SELECT TYPE 

‚

 - 

„

. 

Touch the number key 3 or touch Pizza or +Amount 

repeatedly until MICROWAVE PIZZA is displayed. 

Touch Start/Enter. For microwave pizza the display 

reads USE CERAMIC TRAY. start/enter is blinking. 

Touch Start/Enter again. sensing and the microwave 

symbol 

Ý

 light up on the display.

The appliance starts sensing.

When sensing is complete, a beep will sound and the 

calculated cook time will start to count down.
After the cook time has run out a beep will sound. The 

appliance turns off and the clock is displayed.
Note:  Do not open the door during the sensing 

process, or the program will be cancelled. Once the 

calculated cook time is displayed you can open the door 

to stir, turn or rearrange the food. Touch Start/Enter to 

resume operation.
Opening appliance door during operation
Opening the appliance door during operation will 

interrupt the current mode. Close the appliance door and 

then touch Start/Enter to resume operation.

9

Do not leave oven unattended while popping corn. 

Popcorn may ignite and cause fire.

The popcorn feature lets you pop 3 different bag sizes of 

commercially packaged microwave popcorn. Use the 

following table to determine the setting to use:

Frozen pizza

Metal tray

Fresh pizza

Metal tray

Microwave pizza

Ceramic tray

WHPS

SUHKHDWLQJ