Bosch NET8666UC Manual
14
Changing the basic settings
The cooktop should be turned off.
The cooktop should be turned off.
1.
Turn on the cooktop with the main switch.
2.
Within the next 10 seconds, touch the Timer key for
4 seconds.
™‚
appears in the timer display.
‹
appears on the
display of the front left element.
3.
Touch the Timer key until the number of the desired
basic setting appears in the timer display.
4.
Select the required setting using the number keys. For
basic settings with a double digit input (
™†
) the value
is distributed to the left and right front element display.
5.
Touch the Timer key again for 4 seconds. The setting
is activated.
Leaving the basic settings
Turn off the cooktop with the main switch.
Turn off the cooktop with the main switch.
Cleaning and Maintenance
Daily Cleaning
Note: Recommended cleaners indicate a type of cleaner
and do not constitute an endorsement of a specific
brand.
Glass ceramic cooktop
9
CAUTION
Do not use any kind of cleaner on the glass while
the surface is hot, use only the razor blade scraper.
The resulting fumes can be hazardous to your
health. Heating the cleaner can chemically attack
and damage the surface.
Clean the surface when it is completely cool with the
following exception: remove dry sugar, sugar syrup,
tomato products and milk immediately with the razor
blade scraper (see special care chart).
Wipe off spatters with a clean, damp sponge or a paper
Wipe off spatters with a clean, damp sponge or a paper
towel. Rinse and dry. Use white vinegar if smudge
remains; rinse.
Apply a small amount of the glass ceramic cooktop
Apply a small amount of the glass ceramic cooktop
cleaner. When dry, buff surface with a clean paper towel
or cloth.
Stainless steel side trim
Wipe with the grain when cleaning. For moderate/heavy
Wipe with the grain when cleaning. For moderate/heavy
soil, use BonAmi® or Soft Scrub® (no bleach).
Wipe using a damp sponge or cloth, rinse and dry.
Wipe using a damp sponge or cloth, rinse and dry.
™ˆ
Activation of additional heating elements
‹
Off
‚
On*.
ƒ
Last setting before turning off the heating element
™Š
Selection time for cooking zone
‹
Unlimited*: You can adjust the settings of the last cooking zone used at any time without having to
select it again.
‚
Restricted: You can adjust the settings for the last cooking zone used within 10 seconds after select-
ing it. After that you will have to reselect the cooking zone before setting it.
™‹
Reset to basic settings
‹
Off*
‚
Reset the appliance to basic settings
Display
Function
*factory settings
0O0GG
5JNFS
$MFBO-PDL
$IJME-PDL
¯
0O0GG
5JNFS
$MFBO-PDL
$IJME-PDL