Bosch NET8066UC Manual

10

The cooktop is equipped with a residual heat indicator 

for each element. It shows you which elements are still 

hot. Avoid touching the indicated elements.
If an 

• 

is shown on the display, the element is still hot. 

You could use it, for example, to keep a small quantity of 

food warm or to melt a chocolate coating. As the element 

continues to cool, the display changes to 

œ

. The display 

goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on 

after a power failure. The display lights up for 

approximately 30 minutes.

Use the main switch to turn on the electronic circuitry for 

the control panel. The cooktop is now ready to use.

Turning the cooktop on
Touch the On/Off touch key until the indicator above the 

main switch and the temperature level indicators 

‹

 next 

to the heating elements turn on.

Turning the cooktop off
Touch the On/Off touch key. The indicator above the 

On/Off key goes out. The cooktop is switched off. The 

residual heat indicators will remain on until the elements 

have cooled off sufficiently.

▯

The cooktop switches off automatically when all the 

elements have been switched off for more than 

10 seconds.

▯

The settings will be stored for 4 seconds after turning 

off the cooktop. If you turn the cooktop back on during 

that time the cooktop will continue with those settings.

▯

The residual heat indicator remains lit until the 

elements have cooled down sufficiently. 

•

/

œ

 is 

displayed next to the corresponding element symbol.

This section will show you how to set the elements. The 

table contains details on the heat settings for a variety of 

dishes.

Setting the element
Set the desired heat setting on the control panel.
Heat setting 1 = lowest power
Heat setting 9 = highest power
Every heat setting has an intermediate setting. This is 

marked in the control panel with the 

û

 symbol.

$

Single element

Single elements have only one size cooking surface.
Always use cookware of a suitable size.

ð

Dual element

The size of these elements can be matched to your pan size. The heating element 

must be turned on.
Turning off the outer heating ribbon: Touch 

ö

. The 

ð

 display will turn off.

Adding the outer heating ribbon: Touch 

ö

 again. The 

ð

 display will turn on.

à

Bridge element

The Bridge element combines two individual heating elements into one long griddle 

zone. This configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).
Turning on the Bridge element: Touch one of the two 

$

 touch keys for selecting the 

heating element, then touch the 

à

 key. The 

à

 symbol will appear; both heating ele-

ments are now selected. 

‹

 appears in both displays. Within the next 10 seconds 

select the desired heat setting (1-9). The Bridge element and both individual heating 

elements are now on.
Changing the heat setting: Touch one of the two 

$

 touch keys for selecting the 

Bridge element, and set the new heat level within the next 10 seconds.
Turning off the Bridge element feature: Touch one of the two 

$

 touch keys for 

selecting the Bridge element, and select 0 from the number keys. 

‹

 appears in both 

displays. The heating elements will turn off and the residual heat indicator will appear.