GE AJCQ08ACF Manual

4

 

Turns air conditioner on and off.

 

 Displays the temperature setting. Displays 

hours when setting the timer.

 Mode 

On the remote control, use to set the air 

conditioner to Cool or Fan mode.
On the air conditioner controls, use to set 

Cool or Fan mode at High, Med or Low fan 

speed. Indicator lights on the air conditioner 

controls will show the mode and fan speed 

selected. 

 

Use to set temperature when in COOL mode.

Fan Speeds (Remote control only) 

Use to set the fan speed at Low, Med or 

High.
Delay Hrs

 

2Q³When the air conditioner is off, it can 

be set to automatically turn on in half an 

hour to 24 hours at its previous setting. Each 

touch will set the time in half hours up to 10 

and then in hours up to 24.

To cancel the Delay Timer, press the On pad until 

“CL” appears. Then wait until the display turns off.

2II³When the air conditioner is on, it can be set to 

automatically turn off in half an hour to 24 hours. 

Each touch will set the time in half hours up to 10 

and then in hours up to 24.
To cancel the Delay Timer, press the Off pad until 

“CL” appears and wait for the set temperature to 

be displayed. The unit will now resume normal 

operation.

Reset Filter 

 LED will turn on when fan has accumulated 250 

hours of run time as a reminder to clean filter. 

Press Reset Filter to turn off the LED and reset the 

accumulated run time. 

NOTE: When the air conditioner is turned on, it will 

automatically start in the setting last used

.

„



To ensure proper operation, aim the remote 

control at the signal receiver on the air 

conditioner.

„



The remote control signal has a range of up to  

21 feet.

„



Make sure nothing is between the air conditioner 

and the remote control that could block the 

signal.

„



Make sure batteries are fresh and installed 
FRUUHFWO\³VHHWKH&DUHDQG&OHDQLQJVHFWLRQ

Lights beside the touch pads on the air conditioner  

control panel indicate the selected settings.