Lastolite Cubelite w/ removable back LL LR3687 Leaflet
Product codes
LL LR3687
To fold up your Cubelite the procedure is as follows:
1.
1.
Push one corner diagonally into its opposite corner,
creating a right angle.
2.
Fold the right angle flat to create a rounded square
shape.
3.
Hold the rounded square so that it creates a diamond
shape. and hold it in against your waist.
4.
Bounce it gently allowing the shape to warp slightly
under it’s own weight.
5.
As it bounces keep hold of the cube and take your
right hand across to the middle of your waist.
6.
Then take you left hand across to the same position.
7.
The cube should now be in a figure of eight shape.
Lift the bottom circle of the eight up to meet with the
top circle of the eight.
8.
The cube is now folded.
9.
Place inside the blue circular carry case.
NOTE:
A.
A.
Do not fight against the sprung steel. If it requires a
lot of force then it is being folded incorrectly. It should
work with you if it is folded correctly.
B.
If you are using a 4ft Cubelite
remember to unzip it
on the top and bottom before folding.
To fold up your reflector follow points 3 - 8 as above.
1
2
3
4
5
6
7
8
9
Folding up your
Cubelite
B