Sub-Zero ID30R Installation Instruction

6   

|

   Sub-Zero Customer Care 800.222.7820

SITE PREPARATION

Preparation

Uncrate the unit and inspect for damage. Remove the wood 
base and discard shipping bolts and brackets. Remove and 
recycle packing materials. Do not discard the kickplate, anti-
tip bracket and hardware. 

Remove the kickplate by extracting the two mounting 
screws. Refer to the illustration below.

Anti-Tip Bracket

To prevent the unit from tipping forward, the anti-tip 
bracket must be installed.

The back of the anti-tip bracket must be installed 24"

 (610)

 

from the front of the unit (without panels).

Use all anti-tip bracket hardware as instructed for wood or 
concrete floors.

IMPORTANT NOTE:

 For wood or concrete floor applications, 

if the #12 screws do not hit a wall stud or wall plate, use the 
#8 screws and #12 washers with the wall anchors.

IMPORTANT NOTE:

 In some installations the subflooring or 

finished floor may necessitate angling the screws used to 
fasten the anti-tip bracket to the back wall.

ANTI-TIP HARDWARE

1

Anti-tip bracket

12

#12 x 2

1

/

2

" pan head screws

4

3

/

8

"–16 x 3

3

/

4

" wedge anchors

12

#12 flat washers

4

#8–18 x 1

1

/

4

" truss head screws

4

Nylon Zip-it

®

 wall anchors

SCREW

 
Kickplate removal.