BlueStar RGTNB364CFTBV2NG Installation Instruction



This appliance has been designed to be in-
stalled directly against rear walls and side 
base cabinets.  It cannot be installed di-
rectly against tall side cabinets, side walls, 
tall appliances or base cabinets extending 
beyond 24 inches [610 mm]. 



Side trims must be at least 11/16 inch [17.5 
mm] above the adjoining counter top sur-
faces. 



Any openings in the back wall or the floor 
of the installation site must be sealed. 



Each gas appliance shall be located with 
respect to building construction and other 
equipment to permit access to the appli-
ance.  Such access and clearance is neces-
sary for cleaning and servicing. 



Do not push against the edges or sides of 
any appliance in an attempt to slide it into 
position.  Although all metal parts are de-
burred during the manufacturing process, 
serious injury could occur if the appliance 
were to move suddenly while being posi-
tioned.  We recommend you use gloves 
during the installation process. 



For optimum performance the appliance 
should be leveled during installation.  A 
carpenter type level should be placed on the 
unit three ways:  side to side; front to back; 
diagonally.

 



If the appliance is installed in an island or 
cabinet cut-out the edges should be 
shimmed with small metal coupons

 

                                   RGTNB 2011-REV1