Fire Magic E790I4A1P Specification Guide
E1060i
A790i/E790i
E660i
A540i / A660i
A430i / 530i
33830-SW
/
43830-SW
53830-SW
†
½
50
E790i - 37
A790i - 37¾
31
¼
32
25
½
26
¼
12
½
½
A430i - 19
A530i - 23
½
A540i
- 19
A660i
- 23
½
23
½
23
½
23
½
14
½
14
½
15
¾
14
½
21
24
½
18
14
½
21
30
15
14
21
30
21
31
13
30
21
31
13
14
½
5
¼
20
½
12
12
12
12
Warming Drawer
33930S
/
43930S
53930S
Double Doors
33830-S
/
43830-S
*
53830-S
Masonry Drawer
33930S-12
/
43930S-12
53930S-12
Double Doors w/ Dual
Drawers & Tank Tray
33920-SR
/
43920-SR
53920-SR
Single Access Door
/
43934S 53934S
Double Door Access
33820-SL
/
43820-SL
53820-SL
Single Access Door
w/ Dual Drawers
33917-SR
/
43917-SR
53917-SR
Single Access Door
33820-TSL
/
43820-TSL
53820-TSL
Single Access Door
w/ Tank Tray
33801
/
43801
53801
Single Enclosed Drawer
33802
/
43802
53802
Double Enclosed Drawer
33803
/
43803
53803
Triple Enclosed Drawer
33914-SL
/
43914-SL
53914-SL
Single Access Door
15
CHARCOAL 12-S1
DELUXE 11-S
CHARCOAL 14-S1
24
¾
32
¼
26
¼
19
¾
19
¾
17
12
12
12
20
½
20
½
20
½
20
½
20
½
20
½
½
½
20
½
¾
19
12
COMBO GRILL A830i
50
20
½
3
DESCRIPTION
HOOD
OPEN
HOOD
CLOSED
A
B
Echelon E1060i
35 5/8”
26 3/4”
Echelon E790i
35 5/8”
26 3/4”
Echelon E660i
35 5/8” 26 3/4”
Aurora 790i
35 7/8”
26 3/8”
Aurora A660i
32 1/4”
25”
Aurora A540i
32 1/4”
25”
Aurora A530i
32 1/4”
25”
Aurora A430i
32 1/4”
25”
Deluxe 11-S
30”
25 1/8”
32” Gourmet Charcoal 14-S1
31 3/4”
32 1/2”
26” Gourmet Charcoal 12-S1
31 3/4”
32 1/2”
B
A
3" clearance required (on
both sides) for access
to battery compartment
when using material that
extends out from island
surface.
SEE NOTE 6
DETAIL 1
TYPICAL
(a)
(a)
53938S DOUBLE ACCESS DOORS
is aesthetically designed to fit under the A790i/E790i.
CUT-OUT REQUIRED: 16" x 39"
AVAILABLE WITH LEFT
DOOR HINGE (-SL)
AVAILABLE WITH RIGHT
DOOR HINGE (-TSR)
AVAILABLE WITH RIGHT
DOOR HINGE (-SR)
3"
OUTDOOR KITCHEN CONSIDERATIONS
• Carefully consider grill size & accessories needed
• Combustible construction requires insulating liner
• Select Natural or Propane (LP gas)
• Determine total gas consumption for supply line size
• Access required to gas connections and shut off valve
• Plan location of propane tank away from grill and appliances
• Always refer to the installation and operating instructions of your
Fire Magic® grill and/or accessories for installation guidelines &
safety warnings before starting your project
• Always check all gas connections for leaks
• Provide ventilation in island for gas vapors. Allow at least
four ventilation openings (two at floor level and two 16” above floor
10 in² each) at opposing ends/sides
• Combustible construction requires insulating liner
• Select Natural or Propane (LP gas)
• Determine total gas consumption for supply line size
• Access required to gas connections and shut off valve
• Plan location of propane tank away from grill and appliances
• Always refer to the installation and operating instructions of your
Fire Magic® grill and/or accessories for installation guidelines &
safety warnings before starting your project
• Always check all gas connections for leaks
• Provide ventilation in island for gas vapors. Allow at least
four ventilation openings (two at floor level and two 16” above floor
10 in² each) at opposing ends/sides
LOCATION
• Identify outdoor area where grill will be installed
• Determine the utilities needed (gas, water, electricity, drainage etc.)
• Consider element exposure (sun, wind direction*, weather etc.)
• Determine the utilities needed (gas, water, electricity, drainage etc.)
• Consider element exposure (sun, wind direction*, weather etc.)
MATERIALS
• Foundation- concrete
• Base- brick, stone, stucco, concrete
• Counter top- tile, granite, marble, concrete
• Base- brick, stone, stucco, concrete
• Counter top- tile, granite, marble, concrete
Notes
1. There is a hanger on three sides of each grill. You must
allow clearance for the hanger (SEE DETAIL 1).
2. The control panel (face) of the grill is wider than the
cutout width. This conceals the cutout space on the left &
right hand sides.
3. Clearance of 10” on each side of the oven is
recommended for unrestricted operation of lid and
rotisserie and at least 3” at the rear flange for ease of
maintenance and proper operation. (18” from combustible
surroundings on each side and rear is required)
4. See specific model cutout plan for units equipped with
motorized hood.
5. Insulating liners must be used & are available for
combustible surrounds (See page 6).
6. The rotisserie motor on all models is located on the right
side of the grill. Optional Reverse Brackets are available
to mount rotisserie motor on opposite side. ONLY units
ordered with back burner option come with rotisserie kit
and brackets.
X
?,_[YHJ\[V\[MVY
7V^LY/VVK653@
11”
10”
1 ¼”
Grill Hanger Outline
Grill hanger varies in width
(2½"-3")
depending on the size & configuration
of the grill.
of the grill.
COUNTER TOP
TOP VIEW
Allow the grill face to sit flush
when installed.
FOR BULL NOSE COUNTER TOP
DETAIL 1