GE CSB9120SJSS Installation Instruction

Page of 20
16
Installation Instructions
6   INSTALL MOUNTING SCREWS
  Slide the oven the remaining way into the opening 
so that the side flanges and control panel are 
against the cabinet frame. Make sure that the oven 
is centered in the opening.
  Open the door, place a turntable tray in the oven 
and make sure that the tray in the unit is level.
 Drill pilot holes through the side flanges.
  Drive the color-matched screws into the side 
flanges. It is recommended that the screws 
be hand tightened.
If installing oven with an accessory storage 
drawer:
  Open the drawer.
  Drill pilot holes through the side flanges.
  Drive color-matched screws into the side flanges. 
It is recommended that the screws be hand 
tightened.
NOTE: If installing the Profile Advantium 120V Oven 
with an accessory storage drawer, you must use 
the Under-the-Counter (UTC) mounting bracket for 
the drawer. 
If installing the Monogram Advantium integrated 
model 
ZSC1201
 above 36s, the UTC mounting bracket 
for the accessory storage drawer must be used.
7  FINALIZE INSTALLATION
  Turn power on at the source. The interior light 
should come on when the door is opened.
  Refer to Owner’s Manual for operating instructions.
4   INSTALL BOTTOM TRIM
CAUTION:
 
If installing the Advantium 
120V Oven below 36s, you must use the plastic 
bottom trim due to burn risk to children. The plastic 
trim acts as insulation and will help prevent burns 
to children from hot surfaces.
PRECAUCIÓN:
 
Si va a instalar el horno 
Advantium de 120V debajo de 36”, usted debe utilizar 
el reborde inferior plástico debido al riesgo de 
quemaduras para los niños. El reborde plástico 
actúa como aislante y evitará que los niños sufran 
quemaduras provocadas por las superficies calientes.
NOTE: If installing the Advantium 120V Oven 
with an accessory storage drawer, the bottom trim 
is not required. Proceed to Step 5.
  Installation  Below  36s, align trim tabs on the plastic 
trim to slots in the bottom of the oven.
  Installation Above 36s, align trim tabs on the plastic 
or metal trim to slots in the bottom of the oven.
  Secure the bottom trim to the bottom of the oven 
using 3 screws provided. 
5   INSTALL BOTTOM TRIM WITH 
ACCESSORY DRAWER
If installing with an accessory drawer, see 
installation instructions on page 17 or instructions 
that come with the accessory drawer.
Metal 
Trim
Plastic 
Trim OR
Plastic 
Trim