Monogram ZV1050SFSS Installation Instruction

• Remove protective film on the filters.
• Tip the filter into the lower slots at the rear of the

opening. Lift the filter and pull the knob forward
until the filter rests on the slots.

• To remove the filters, grasp the knob and push the

filter towards the rear and tilt downwards.

• Remove the protective film covering the control

panel on the front face of the hood, and any other
packaging materials.

• Check all 4 lamps to assure tightness in sockets.
• Refer to the Owner’s Manual for operating

instructions.

• Clean the hood with an approved stainless steel

cleaner.

Filter Slots