Iron-A-Way IAW42WDU Specification Sheet
Specifications
February 2015
Product Model Numbers
Ironing Centers: IAW-42
Dimensions (Actual Size)
Overall height: 51”
Overall width: 14 1/2”
Overall depth including door: 3 3/4”
Dimension from wall to outer
Edge of frame (when recessed): Flush
Penetration into opening: 2 1/4", 3”, 3 3/4" **
Rough opening height: 51”
Rough opening width: 14 1/2”
Wall opening depth: 3 7/8”
Additional Information
•
Unit may be surface mounted (extends into
the room 3 3/4”) or can be recessed (door
only extends into room for a flush mount) into
any wall with standard 16” center studs.
•
See table bottom right to determine desired
ironing board height above the floor.
•
Unit can be provided with a left piano hinge
door upon request. Right hinge is standard.
For flush mount special hinges are required.
•
Comes standard with wood veneer door.
•
Recessed mounting - Recommended to
attach 2” x 4” cleat to studs, level with the
bottom of opening (for support.)
•
Door opens approximately 180°. Allow at
least 16” to the side of the unit for door to
swing open.
•
Options include: flat white door, no door,
sleeveboard, special hinges (recess
applications), and iron.
See Page 2 for additional information
** Depends upon application process
Ironing Board Height
Surface Mount
or
Recessed
Cut Opening Board
Above floor Height
28”
35”
27” 34”
26”
33”
25”
32”
24”
31”
23”
30”
22”
29”